16
Start:
Pressing this button starts the measurement session; when the session is over, a graph showing the "I-V" curve in red
is created.
NOTE:
Before the measurements are made, a test is run to verify the presence and correct operation of the environment
or panel temperature probe and the solar radiation (pyranometer) probe. If an error is found in the probe measurements
or the remote connection (if active), the measurement session is aborted. An error message appears on the screen;
check the connection and correct operation of the probe or the connection to the remote unit.
Single panel measurement window
Error message box
Error message box
Panel measurement graph
When "STRING" measurement is selected, a dialog box opens; the number of panels in the string to be tested must
be entered before the measurements are made.
String of panels measurement window
Number of panels entry window
