UMX MXC-570, Руководство пользователя

Страница: 12 / 98

12
• While the battery is charging, the battery symbol will gradually scan from right to left.
• A new battery must be fully charged before it is used for the first time.
• To keep the battery functioning optimally, it is recommended that you occasionally discharge the battery
fully by consuming the power until the phone is switched off automatically.
• During the course of charging, it is normal for the phone and the battery to heat up slightly. The phone
will automatically protect itself when battery temperature rises to control temperature variation by
extending the charging time.
• The handset will give an alert as the battery is running out. When the power has run out, the handset
will be switched off automatically.
• Actual time of usage of the battery varies according to different operation modes and settings of network
base station. If you use the phone when battery is rather low, the phone may switch off automatically.
• You may choose to charge the battery under power-off or standby state. If the phone is charged under
power-off state, it will start and display the graphic denoting that the unit is charging.
• When the battery is fully charged, charging operation stops automatically. The battery symbol on the
screen will maintain a graphic showing that the battery is full. At this time, please unplug the charging
cable.
• Calls can be made while charging.
MicroSD Card Loading
The MicroSD card slot is located underneath the battery. Please follow the battery installation instructions
above to access the MicroSD card slot. The MicroSD card slot is located in the upper right corner of the battery
well.