4.
Pivot the front panel down, and then pull it up and out.
With both the cover and front panel removed, you can now install
an additional removable-media drive in your computer.
Always replace the cover and front panel when you complete an
installation, before you turn the computer on.
To replace the cover and front panel:
1.
Engage the hooks on the
bottom of the front panel and
then swing it up and closed . Press gently until the
two
top tabs engage .
2.
Lower the cover all the way down onto the case.
3.
Push the cover back until it touches the front panel,
making sure the two tabs at the bottom rear properly
engage.
4.
Reinsert the thumb-screw at the top edge of the back
panel.
Installing an Expansion Card
You can install expansion cards for video and graphics applications,
networking and communications, additional processing power, or
other purposes. These cards fit into the
three PCI expansion slots
located on a riser card inside the computer.
Riser Card
PCI Slot
Comm slot
(Communication Slot)
Inline cache
module
Processor card
