22
Fig. 10-11 Polishing the anode (example)
10.6.3.
Cleaning Magnetic Poles 1 and 2
Observe the surfaces (especially indicated with arrows in the figure below) of magnetic
poles 1 and 2 shown in Fig. 10-12. The surfaces should be of metallic color.
If they are discolored or stained, polish them with sandpaper. First, polish them with
rough sandpaper #180 or #240 until the color becomes metallic and then finish with finer
sandpaper of #400.
Fig. 10-12 Magnetic poles
Before polishing
After polishing
Fig. 10-13 Magnetic poles 1 and 2 before and after polishing
①
Magnetic pole 1
②
Magnetic pole 2
Содержание G-Tran Series
Страница 2: ......
Страница 52: ...42 Fig 15 2 Dimensional drawing ...