Uludag G-250 Скачать руководство пользователя страница 18

Страница: 18 / 66

1.3. Preface

This manual has been prepared to provide you with the information as an introduction to

the machine specifications and operation and also required information for maintenance

and trouble-free continuous operation. Manual also covers the instructions related to

erecting in place, making service ready, operation and periodical maintenance of the

machine, as well as general safety instructions.
We don't recommend you to do any repair or modification unless otherwise stated to do

so. All the disassembly operations of the machine must be handled by the authorized

and qualified technical personnel.
Accurate and systematic operation depends on not only on strictly obeying the

maintenance instructions but also understanding the reason-why behind. Therefore,

please keep up with the maintenance instructions. Uludağ Makina with its technological

background and experience is always at your command for further knowledge wherever

required. We hope that you will find your hinge slot milling machine easy to operate and

it will meet your expectations from Uludağ Makina products. We recommend you to keep

this manual under convenient conditions and in an easily accesible place for prompt use.

1.4. Warranty

The machine is under warranty for the period specified in the Warranty Certificate as of

the date of sale invoice. Including/excluding services and parts within the scope of

warranty are specified in the enclosure of the warranty deed. Technical service

department in our factory is ready to meet your demands for every kind relevant to this

subject.

1.5 Contacts

The following information about the machine needs to be supplied for the written and

verbal communication with the dealer or the manufacturer:

•

Machine model

•

Machine’s serial no.

•

Machine’s supply voltage and frequency

•

The name of the dealer where machine was purchased

•

Machine’s date of sale

•

Description of the defect, if any

•

Description of the action

•

Daily operation period

Содержание G-250



































































Результаты поиска

Содержание G-250

Отзывы:

Похожие инструкции для G-250

Бренды по названию

Популярные бренды

Uludag G-250, Руководство по вводу в эксплуатацию, использованию и обслуживанию

Результаты поиска

Содержание G-250

Отзывы:

Похожие инструкции для G-250

Бренды по названию

Популярные бренды