February 2022
C6057701-01
Quick Guide
Pour cold water into the bath so that it
submerses the level sensor (Do not overfill).
Add the required dose of detergent.
To save the cycle data to the memory card,
ensure that the memory card is installed in the
port prior to turning the machine on.
Switch on the machine via the switch at the
rear of the unit, just above the electrical mains
lead.
Press the “START” key to accept the
programmed cleaning cycle settings and start
the cleaning cycle.
At the end of the cycle, remove the basket from
the bath and rinse the items under clean running
water.
The lid can be inverted, and the basket placed
on top to catch excess fluid as the items dry.
Please refer to the
full instruction manual
for
more detailed instructions.
Change the cleaning liquid at regular intervals. Your cleaning process will
determine how often to change the liquid
–
the more soiled your items, the
more often you will need to change the liquid.
REMEMBER
-
Always ensure the liquid is above the level sensor when in operation.
-
Do not put hot water above 50°C into the bath.
-
Always use the basket.
-
Never expose hands to cleaning solutions.
-
Never use toxic, flammable, acidic, caustic, or corrosive chemicals or
liquids not recommended by Ultrawave.
-
Never breathe the fumes from strong solutions.
-
Rinse the items in clean water once the cycle is complete.
Subjecting the bath to improper treatment or misuse will invalidate the
warranty.
If you require assistance, please call or email Ultrawave.
+44 (0)29 2083 7337 [email protected]
www.ultrawave.co.uk
Liquid level sensor
