February 2022
C6057701-01
Installation
The following parts and accessories are included with the Q-Series ultrasonic
bath:
•
1 x Basket
•
1 x Lid
•
1 x Memory card
•
1 x USB card reader
•
1 x 2m length of drain hose
•
1 x Hose tail
•
1 x Ultraclean detergent sample
•
1 x Power cable
•
1 x Q-Series quick guide
How to install:
Locate the Q-Series close to a drain or sink to allow easy drainage of the tank.
Screw the hose tail connector into
the drain valve located on the rear of
the unit.
Connect one end of the drain hose to
the hose connector and locate the
other end over a drain or sink.
Fill the bath with water and the
correct dose of detergent.
Connect the power lead into a
suitable mains socket.
Ensure that the mains plug, and
switch are easily accessible.
Once plugged in, switch on your Q-Series bath via the on/off
switch at the rear of the unit.
The switch will then illuminate.
Your Q-Series ultrasonic bath is now ready to use.
