6
KEY 4
Controls
Ensure your
Q-Series
ultrasonic bath is plugged
into a 220-240 VAC fully earthed supply.
Once plugged in, switch on your
Q-Series
bath via
the power on/off switch at the rear of the unit.
The switch will then illuminate.
The
Q-Series
is operated through a menu driven control system:
The different keys perform the following functions:
KEY 1:
Enter – Starts and ends the ultrasonic cycle
KEY 2:
Menu – Scroll through the menu
KEY 3:
Up/On – Adjust the settings in the options menu
KEY 4:
Down/Off – Adjust the settings in the options menu
KEY 3
KEY 1
KEY 2
