Ultrawave ARGON, Инструкция оператора

Страница: 5 / 26

3
Quick Install Guide
Locate the Argon ultrasonic cleaning system close to a drain.
Mount the electrical cabinet on a wall or optional stand in a suitable location to avoid
being affected by the cleaning process.
Please ensure there is at least 100mm of space on both the left- and right-hand side of
the cabinet to allow for fan filter cleaning and ventilation.
Connect all electrical connections from tank to control box matching the socket label
to the plug label:
Do route the cables between the tank and electrical cabinet in suitable open frame
cable trays keeping a separation between the sonics and sensor cables.
Do not let the cables rest on the floor creating a trip hazard
Do not
let the cables rest on the floor as fluid from the process may affect the outer
insulation
Do not coil up excess cable.
Do connect the mains lead into a suitable mains outlet.
The Argon Series tanks are divided into the process area on the left and weir area on
the right. Both areas have independent drain valves fitted at the rear of the unit.
Please ensure these valves are in the closed position before filling.
Drain valve closed Drain valve open
Example Wall Box