808 Gilman Avenue Berkeley, CA., 94710 p:925.253.2960 www.ultraviewcorp.com
2) Missing Reference Clock.
3) Missing Output from SynthA (CRO/24).
POWER BAD LED
This LED displays the status of the power supply to the board:
OFF: Board within normal operating parameters.
Red: Board is outside of specs, check power supply levels.
MODE B LED
This LED displays the status of the board loading sequence.
Green: FPGA loaded correctly.
Off:
Board did not power up correctly. Shut down system and then power on again.
v1r06
Page
11
of
27
Copyright © 2008 – 2010 Ultraview Corporation
Содержание SYNTH1000x2
Страница 2: ......