UltraView SYNTH1000x2, Руководство пользователя

Страница: 19 / 27

808 Gilman Avenue Berkeley, CA., 94710 p:925.253.2960 www.ultraviewcorp.com
EXAMPLE #3 – TWO FULLY INDEPENDENT SWEPT SINUSOIDS – SWEEP MODE
Synthesize two swept sinusoids, one with increasing frequency and the other with decreasing
frequency.

1.000000 MHz from Synth A, increasing at 1Mhz/sec (Sweep Rate = 1e+002 hz/step * 10k
steps/sec) for 9 seconds, then repeating (fall time nearly instant)

10.000000MHz from Synth B, decreasing at 1MHz/sec (Sweep Rate = 1e+002 hz/step * 10k
steps/sec) for 9 seconds, then repeating (rise time nearly instant)
Notice the “SynthA sweep mode enable” and “SynthB sweep mode enable” switches are both enabled,
but either can function individually.
v1r06 Page
19
of
27
Copyright © 2008 – 2010 Ultraview Corporation