27
PPPoE interface
Configuration Meaning
PPPoE dial
Username
: Input your assigned PPPoE Username.
Password
: Input your assigned PPPoE Password.
Auto login connection
: Whether to automatically
connect PPPoE on boot.
Auto failure connection:
When connect failed
whether to automatically connect PPPoE.
Enabled PPPoE
: Whether to enable PPPoE.
After the parameter configuration is completed, if
you do not select "enable PPPoE", then you can
click on the "save" button, it only saves the
configuration parameters; but if you select "enable
PPPoE" and click "save" button, it can
immediately use the PPPoE mode to connect the
network, at the same time it will pop up PPPoE
connection box, clicking the "disconnected" will
pop up PPPoE configuration frame; if you click
"connect" ,it will reconnect PPPoE; if you click
"Cancel" button, it will only save the
configuration parameters which have been set, not to
enable PPPoE connection.
QoS
Tap "Network"----> "QoS", after selecting or modifying the default settings
click the "Save" button to save successfully.