Ultrative 620 series, Руководство пользователя

Страница: 15 / 84

620 Series IPPhone
www.ultrative.com/
Ultrative Communication
Placing a Call
Here are some easy ways to place a call on 620 Series IP Phone: :
If you want to... Then...
Place a call using the
handset
Pick up the handset;
--1
）
Hear the dial tone;
--2
）
The first line light and display
;
--3
）
Enter number;
--4
）
Press “ # ” button(default);
or press ;
or wait five seconds(default)
Then send the call;
Place a call using a
Speakerphone
Press Speaker button;
or Programmable buttons;
or ;
Place a call using a
headset
Press Headset button.
Redial --Press REDIAL button to dial the last number
-or press Navigation button-Right > “Dialed number”, select a
number, and press or OK button.
Dial from the
Directory on your
phone
--1) Press MENU or OK button
>
“Call history”, you can select
“Missed calls”, “Received calls” and “Dialed numbers”,
- or press Navigation button (in Standby interface) > select “Missed
calls” ( down ), “Received calls” ( left ) and “Dialed numbers”
( right ) );
--2) Then press OK button or .
Place a call while
Another call is active
--1) Press Hold button or ;
--2) Enter a number;
--3) Press ‘ #’ button (default) ;
-or press to send the number.
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing , Headset or Speaker button.
• If you make a mistake while dialing, press C button to erase digits.