www.ultratecfx.com
16
Run Mode
To recall and run a programmed show,
At the Main Menu select:
*RUN OPERATOR SHOW*
Press >START<
This prompt appears
RUN A PREVIOUSLY PROGRAMMED SHOW
BY RECALLING ANY OF THE OP PROGRAMS
Select the programmed memory keys to be loaded by selecting a key from Mem.1 through Mem.4.
Note that the >TC MEM< keys will not respond in Run Operator Show.
This prompt appears
RUN OPERATOR X MEMORY SHOW
ARE YOU SURE?
PRESS >DELETE< TO CANCEL
PRESS >ENTER< TO CONFIRM
Editing a programmed memory location can be done at the Program Operator Show Menu by high-
lighting the memory location and pressing the >ENTER< key to bring up the contents of that memo-
ry location.
Use the arrow keys to highlght the cues to be edited. Use the >DELETE< key to remove incorrect
channel.
To add a channel, use the arrow keys to highlight the channel following the channel to be inserted.
Select the channel to be inserted as you normally would using the encoder and channel select but-
tons.