www.ultratecfx.com
14
If the channel selections are not correct, press the arrow keys to highlight the incorrect entry. Then
press the >DELETE< key. The >DELETE< key will erase a channel number and the symbol (> + or E)
that follows .
Note that channel selections can be duplicated in the same Cue.
If channel selections are repeated in subsequent Cues, the controller will attempt to Fire the repeat-
ed channels again as they occur in the show.
Programming A Chase Fire Cue
A Chase Fire Cue is defined as a single channel, or Group of channels, called a ‘Stage’, separated by a
programmed Delay time.
Chase ‘Stages’ are displayed the same as a group fire cue, with the channel numbers separated by
the > symbol.
The DELAY locations are indicated by the the ‘+’ symbol.
The programmed Delay time is inserted at each ‘+’ symbol when the cue program has been com-
pleted.
In Run Time, the channel(s) in the first stage of the Chase are Fired at once, (ALL channels preceding
the first ‘+’ symbol).
The program then pauses for the Delay time. (Delay time is selected during programming).
The next Stage of the Chase is Fired after the pause. The sequence continues until the -end symbol
(end of Cue).
During RUN, the FIRE button must be held down for the duration of the chase.
Channel selection is the same as for a Group Fire Cue.
Channels are selected for the first stage of the Chase followed by >ENTER<.
As many channels as desired can be selected for each stage of the Chase and in any order.
To end the first stage of the Chase select the first channel from the second stage and press the
>CHASE< key. The + symbol will appear between the two stages denoting a delay.
Please note that the >CHASE< key will only function after a channel number and Not after the >EN-
TER< key.
The controller will insert the ‘+’ symbol to indicate that a Delay time will be inserted later in the pro-
gram.
· A sample stage selection appears as follows
1__108>609+114>316E-end
· A multi-stage Chase may appears as in the following example,
1__108>609+114>316>109+101+102+501>116>403+911E-end.
