Ultratec EZcom PRO, Руководство пользователя

Страница: 58 / 64

5 6 • S P E C I F I C AT I O N S
FCC information
The EZ com Pro has been tested and found to comply
with the specifications for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates and uses radio frequency
energy and if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the EZ com Pro
and the receiver.
• Connect the EZ com Pro to an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA. A
label is located on the underside of the EZ
com Pro
containing, among other information, an FCC
registration number, D8KUSA-30823-DT-E. If
requested, this number must be provided to the
telephone company.
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with
this product. It is designed to be connected to a
compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the quantity of
devices which may be connected to the telephone
line. Excessive RENs on the line may result in the
devices not ringing in response to an incoming call.
In most, but not all, areas the sum of RENs should
not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as
determined by the total RENs, contact the local
telephone company. The REN for this product is
0.0B.
Should you experience trouble with this telephone
equipment, please contact:
Ultratec National Service Center
5901 Research Park Blvd.
Madison, WI 53719
email: service@ultratec.com
For repair or warranty information, please contact
Ultratec Inc. Customer Service at (608) 238-5400
(V/TTY). If the equipment is causing harm to the
telephone network, the telephone company may
request that you disconnect the equipment until the
problem is resolved.
This equipment cannot be used on public coin phone
service provided by the telephone company.
Connection to party line service is subject to state
tariffs.
If the EZ com Pro causes harm to the telephone
network, the telephone company will notify you in
advance that temporary discontinuance of service
may be required. But, if advance notice is not
practical, the telephone company will notify you as
soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe
it is necessary.
Occasionally, your telephone company may make
changes in its facilities, equipment, operation, or
procedures that could affect the operation of your
equipment. If so, you will be given advance notice of
the change to give you an opportunity to maintain
uninterrupted service.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the
installation of the EZ
com Pro does not disable it. If
you have questions about what will disable alarm
equipment, consult your telephone company or a
qualified installer.
Other than replacing the batteries, the EZ com Pro
does not have any user-serviceable parts.
Modification or changes to the EZ
com Pro not
expressly approved by Ultratec, Inc. can void your
authority to operate the TTY.