ULTRASTOR ULTRA 12F, Руководство по установке

Страница: 15 / 52

appropriate BIOS address to which the board is jumpered.
EXAMPLE
g=C800:5
(if the board is jumpered to C800:0) OR
g=CC00:5 (if the board is jumpered to CC00:0)
c. The UltraStor "Utility Main Menu" will appear on the screen (See Figure
2.0).
d. Select the "Drive Preparation" option by using the up/down arrow keys and
press "Enter".
e. The "Hard Disk Drive Preparation Menu" will appear on the screen (as
shown in Figure 4.0).
f. Select the drive number to be low level formatted by using the arrow keys
and the SPACE BAR. Users can also change the default value on interleave
setup, head skew, and cylinder skew, before executing the low level format
g. For most users, go to the AUTOFORMAT field to low level format the
specified drive. Users can choose either the "Brief AutoFormat" or the
"Extended Auto Format". The "Extended AutoFormat" will take longer to
prepare the drive.
h. For the advanced user or for certain applications, users can choose to
bypass the AutoFormat and go to the disk controller commands for defect
management and low level formatting (See Figure 4.0 for the option and
command explanation).
i. After the message "Format Complete", hit ESC key twice to get out of the
low-level format utility.
Reference Manual Page 13