Ultrasonix SONIX Series, Руководство по обслуживанию

Страница: 105 / 136

The DICOM Print Brightness/Contrast property page changes the brightness and contrast
settings:
These settings are applied to the images that are sent to the SCP not to the images stored
locally.
The effect of these settings can be seen in the Before and After images
Contrast Adjusts the level of contrast applied to the images.
Brightness Adjusts the level of brightness applied to the images.
Reset
Resets the values of the DICOM print contrast and brightness back to zero.
Note: To adjust the brightness/contrast settings, position the trackball
arrow over the brightness or contrast slider, hold down the Select
button at the same time as moving the trackball left or right to the
desired position.
SONIX Service Manual SSM – 001, Revision F Chapter 9: DICOM Setup
97