Ultrasonic 2400FA, Руководство по эксплуатации

Страница: 7 / 17

UltraSonic LLC. Model Ultra 2400FA
7
Control Panel Button/Light Functions:
•
Cycle Start Button: After pressed Starts the UltraSonic and Agitation timers and
Will run according to timer settings (Green Lamp), when
Finished the Filtration timer will run according to timer
Setting (Yellow Lamp), when cycle is complete or in rest
(Red Lamp).
•
Stop Button: After pressed Stops Ultrasonic, Agitation and Filtration
Operation and resets Timers
•
Arrow UP Button: Moves Agitation to Up Position
•
Arrow DOWN Button: Moves Agitation to Down Position
•
Alarm Light: Indicates Low Water or Over Load
(Press Menu Button to reset)
•
Heat Light: Indicates when Water Heater is ON.
•
Ultrasonic Light: Indicates when Ultrasonic is ON.
•
Agitation Light: Indicates when Agitation is ON.
•
Heat Button: Manual Start/Stop Heating
•
Ultrasonic Button: Manual Start/Stop Ultrasonic Operation
•
Agitation Button: Manual Start/Stop Agitation Operation
•
Filtration Button: Manual Start/Stop filtration Operation
•
Aux Button: Manual Start/Stop Auxiliary Operation
•
Menu Button: Menu select and Save Setting
•
Menu Down Button: Reduce Value/Move back in Menu
•
Menu Up Button: Increase Value/Move forward in Menu
Display panel:
•
SONIC: Display Ultrasonic Timer
•
AGIT: Display Agitation Timer
•
FILT: Display Filtration Timer
•
TEMP: Display Actual Temperature/Set Temperature
Menu Operation:
•
Press Menu Button: To select different Menu option press up button until
desired Menu. To return back to a Menu selection press
down button to return. To select desired Menu Option press
Menu Button until edit position is reached then use Up and
Down Buttons to edit selection,
press Menu button to save settings.
•
Temperature Set: Press Menu Button until Temp Control, Press Menu Button
again until Temp Set, press Up/Down Buttons to set
Temperature, press Menu Button to Save.
Press UP Button to move to next setting.