ULTRA SECURE
www.ultrasecuredirect.com
11
To enter the SIM card number, you need to send the following command to the
UltraCOM 4G:
1234#SIM#nnnnnnnnnn
Variable data
Meanings
1234
Default password, to be adapted if the password is changed.
nnnnnnnnnn
Number of the SIM card inserted in the UltraCOM 4G.
User settings
Numbers defined as users
will be able to receive a call from the UltraCOM 4G
when someone presses the call button on the panel. They can also
open access
(
if
the gate or latch connected,
see page 14
)
by call
(
see page 13)
and by SMS
(see page 15
).
To define a number as a user, you need to send the following command to the
UltraCOM 4G:
1234#UXX#nnnnnnnnnn
Variable data
Meanings
1234
Default password, to be adapted if the password is changed.
XX
Position number (
two digits, from 01 to 09
).
nnnnnnnnnn
User phone number.
You can define up to 9 different users.
Secondary user settings
Numbers defined as secondary users
will not be able to receive a call from
UltraCOM 4G
when a visitor presses the call button. On the other hand, they will
be able to
open the access
(
if the gate or latch connected,
see page 14
)
by call
(
see page 13
)
and SMS
(
see page 15
).
To define a number as a secondary user, you need to send the following command
to the UltraCOM 4G:
To confirm the command, the UltraCOM 4G sends you a reply SMS. If the
number entered is not correct, you will receive an error SMS (
ERR: SIM)
after 5 minutes.
To confirm the command, the UltraCOM 4G sends you a reply SMS. If this
SMS contains an error message (
ERR:
), refer to the error response table
(
see page 30
) to identify the cause.
