Ultranatura SP-100, Руководство по эксплуатации

Страница: 10 / 24

10
GB
7. Replacing the power cable
Danger!
If the power cable for this equipment is damaged, it
must be replaced by the manufacturer or its after-
sales service or similarly trained personnel to avoid
danger.
8. Cleaning, maintenance and
ordering of spare parts
Danger!
n
Unplug the power plug prior to any maintenance
work.
n
For mobile applications, the equipment should be
cleaned with clear water after every usage.
n
For stationary installation, it is recommended that
you check the floating switch for proper
functioning every three months.
n
Use a water jet to remove any lint or fibrous
particles that may have become trapped in the
housing.
n
Remove sludge from the shaft bottom and clean
the shaft walls every 3 months.
n
Use clear water to remove deposits from the
floating switch.
8.1 Cleaning the paddle wheel
If a lot of deposits collect in the housing, the bottom
part of the equipment must be dismantled as follows:
1. Disconnect the intake cage from the housing.
2. Clean the paddle wheel with clear water.
Do not put down or rest the equipment on the
paddle wheel!
3. Assemble in reverse order.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
n
Type of machine
n
Article number of the machine
n
Identification number of the machine
n
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
Anleitung_SP_100_SPK7__ 24.02.14 15:45 Seite 10