9
WIRING DIAGRAM
TITAN DUAL LEG
WIRING DIAGRAM
Below is an image of how the Titan is cabled (showing the DPG1C Bluetooth handheld controller), this should
not need to be changed unless swapping to an integrated automation setup using contact closure.
Ports and their uses:
•
AC: 240 V, 50-60 Hz, 200 W
•
A1 & A2: Parallel Controller Ports (Bluetooth, IR, or Dry Contact Closure for automation)
•
1: Actuator/Column 1 Port
•
2: Actuator/Column 2 Port
IMPORTANT
The lift should not be run up and down more than 4 times, or continuously at full load for
more than 1 minute without a 10-minute break.
Overheating will damage the Control Box.
240 V 50-60Hz
POWER INPUT
ACTUATOR/COLUMN 1 PORT
A1 & A2
PARALLEL PORTS
ACTUATOR/COLUMN 2 PORT
