11
OPERATION: DPG1C BLUETOOTH
TITAN DUAL LEG
TO OPERATE THE LIFT WITH BLUETOOTH HANDSET:
•
On the Desk Control App, disconnect from the matched device.
•
To do this, press “More” on the App and then select the matched device.
•
Select the matched device and press “DISCONNECT”.
•
Your controller is now disconnected from the App.
•
On the DPG1C controller, press the Bluetooth button for two seconds to enable pairing mode, the LED
Strip will turn Blue.
•
Press both the “UP” and “DOWN” buttons on the
HANDSET
to pairs the handset with the DPG1C controller.
Please Note:
•
The Desktop Control App
must
be used first to operate the unit at least once before following the
above procedures to use the handset.
•
In the event of a power outage, you need to operate the unit with the Desktop App again at least once
before you can use the handset. Also, remember you need to disconnect the App before being able to
use the handset.
BLUETOOTH HANDSET
TO RESET THE DPG1C CONTROLLER:
•
Push and hold the “Reminder” and “Favourite” buttons until the LED strip flashes Red 3 times to
indicate the resetting is done. This will remove the Upper Limit and any Favourites saved.
