17
Advanced Functions
Reference page
Adjustment during Playback
Tracking adjustment
If noise appears in the picture during playback, reverse/forward
slow playback, fast playback, reverse playback, frame or field
playback, you can reduce or eliminate it by adjusting the
tracking.
How to adjust during playback
1. Press TRACKING button (+) or (–) to achieve the best
picture.
How to adjust during reverse/forward slow playback,
fast playback, reverse playback, frame or field playback
1. During still picture, turn SHUTTLE to obtain the respective
playback mode.
If noise appears in frame or field playback, set to slow
playback.
2. While turning SHUTTLE, press PAUSE button.
•
The playback picture is fixed at the selected speed.
3. Release SHUTTLE.
4. Press TRACKING button (+) or (–) to achieve the best
picture.
Initializing the tracking
The tracking will be reset to its initial setting by pressing both
TRACKING buttons (+) and (–) together during playback.
Note
•
Adjust the tracking at each playback mode or the type of
playback (fast playback, reverse playback, etc.), since the
method of tracking adjustment varies.
•
Although the tracking is adjusted during reverse playback or
reverse slow playback, the noise may remain on screen.
If noise appears
TRACKING
Frame or field playback
1. To forward frames or fields one by one, turn JOG during still
picture.
•
Turn to the right to forward.
•
Turn to the left to reverse.
To forward frames or fields continuously, keep turning JOG
during still picture.
•
Keep turning to the right to forward frames (fields)
continuously.
•
Keep turning to the left to reverse frames (fields)
continuously.
To stop frame or field playback, release JOG.
•
The playback picture stays at still.
Note
•
Noise bars may appear on the picture while switching
between forward and reverse frame or field playback.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
•
When a picture recorded in 6H or 8H mode is played back in
L18H, L24H, L30H or L40H mode, noise may appear on
screen after the adjustment.
•
The noise bars will move continuously when a TRACKING
button is depressed.
Vertical adjustment (picture vibration at the top and
bottom)
The picture vibration during still picture, fast playback or
playback at L18H-128H or 0H mode can be reduced or
eliminated by the following steps.
How to adjust
1. Press PAUSE button during playback.
2. Press VERTICAL ADJUST button (+) or (–) to reduce or
eliminate the picture vibration.
Initializing the vertical adjustment
The vertical adjustment will be reset to its initial setting by
pressing both VERTICAL ADJUST buttons (+) and (–) together
during still picture, fast playback or playback at L18H-128H or 0H
mode.
Note
•
Horizontal vibration cannot be corrected with VERTICAL
ADJUST buttons.
•
VERTICAL ADJUST buttons will not work, when QUASI V-
SYNC of FIRST TIME SET UP menu is set to OFF.
•
The picture vibration during still picture, frame or field
playback may not be adjusted with VERTICAL ADJUST
buttons.
When the picture is vibrating
POSITION
VERTICAL ADJUST
