22
KRMU000003
REV A - 07/20/01
TIMER RECORDING – QUICK PROGRAM
The Quick Program feature simplifies the process of programming your VCR to record.
When you press QUICK PROGRAM on the remote control, you will immediately see the
Program to record
menu and can begin programming right away.
You can use this feature even when the VCR is stopped, playing, fast forwarding, rewinding, or
off. (Quick Program does not work while using OTR
2
.)
1. Press QUICK PROGRAM on the remote control.
If the VCR is OFF, it will turn ON. After tuning your TV to
the correct input,
Program to record
menu will appear.
IMPORTANT:
If the VCR memory is full,
Program memory is full
will appear for 3 seconds,
and then the Recap screen will appear. Use
CANCEL to erase an entry before you can add
another one.
2. Complete steps 3 through 9 of Conventional VCR Timer
Recording. When you have finished, press QUICK
PROGRAM again.
If the VCR is stopped, it will turn off and be ready to record
your program at a later time.
If the VCR is playing, fast forwarding, or rewinding, the
menus will turn off, but the VCR power will remain on.
3. When you are finished with all programming, make sure
the VCR is turned OFF and the programmed recording
light is lit before the recording time.
IMPORTANT:
If you press QUICK PROGRAM,
but the clock is not set,
Set the clock
menu will
appear. Set the clock manually.
