11
KRMU000003
REV A - 07/20/01
USING YOUR REMOTE CONTROL,
continued
Using the
remote
control to
operate your
TV
The remote control can operate many of the frequently-used functions of your TV. You only
need one remote to operate both your VCR and TV.
(Default setting is code button 1.)
Brand of TV
Code Buttons
Mitsubishi
1, 2, 3
Fisher
0
GE
VOLUME
Goldstar
2, 9
Hitachi
8
JVC
MUTE
Magnavox
4
NEC
2, 9
Panasonic
CHANNEL ,
Pioneer
6
Philips
4
Proscan
VOLUME
Quasar
CHANNEL
RCA
VOLUME
Sanyo
0
Sharp
3, 5
Sony
VOLUME
Toshiba
7
Zenith
INPUT
Setting your
remote
control to
operate your
TV
1. Turn off your TV.
2. Set the TV/VCR slide switch to the TV position.
3. While pressing and holding the SP/EP button,
press the code button listed that corresponds to
the brand of your TV.
4. Press TV POWER on the remote control. Once
your TV has turned on, your remote is set up to
operate your brand of TV.
If your TV does not turn on, repeat step
3
using
the next code listed for the brand of your TV.
If none of the codes listed for the brand of your
TV work, then repeat step
3
several times using a
different code button until one works. The
possible code buttons are: 0, 1-9, MUTE,
VOLUME , , CHANNEL , , and INPUT.
You do not need to perform this set-up again until
you change the batteries, set up your remote for
another brand of television, or you get a new TV.
Once you have correctly set your remote control
to operate your TV, you will be able to use the TV
POWER, CHANNEL, VOLUME, and number
buttons to operate your TV.
IMPORTANT:
Because of variations among models,
some or all buttons may not work, or they may
operate different functions than expected for your
particular TV. If this occurs, you may need to use
your TV remote control.
Sometimes manufacturers will change the remote
control codes for their products or they will use more
than one code. If this is the case, your remote may
not be able to control your TV.
When you replace the batteries in your remote, the
remote may return to its initial setting (code button 1).
Repeat the steps above to reset your remote control.
If you enter a new code, the previous code will be
erased.
