Ultrak KD6 Z-SERIES, Советы по установке и обслуживанию

Страница: 23 / 23

518854-2960-D 17 KDMU040013
7/20/01
9.0 SPECIFICATIONS
Power Requirements: 12Vdc
1
– 15Vdc @ 1.1A, non-isolated
24Vac
±
10% @ 0.75A, non-isolated
Weather Dome Heater
24Vac @ 2.1A
Pan and Tilt Angular Travel: Horizontal – 360° continuous slip ring design
Vertical – 0° horizontal to 90° down
Pan and Tilt Speed: Pan – continuously variable 1° to 180° per
second.
Tilt – continuously variable 2° to 90° per second.
Speed to PreShot – 1 second
Operating Temperature: Indoor
32
°
F to 104
°
F (0
°
C to 40
°
C)
Outdoor
-40
°
F to 122
°
F (-40
°
C to 50
°
C)
Installation: Mechanical: Designed for quick and easy
installation/disassembly on wall or ceiling.
Electrical: Terminal Block
Mounting: Dropped Ceiling, Hard Ceiling, Indoor or
Outdoor Pendant
Camera: No lag, no burn CCD sensor, ¼” format
Power Requirements: 9V dc
NTSC
Resolution: >470 TV lines
PAL
Resolution: >460 TV lines
NTSC or PAL
Minimum Illumination: 3 Lux with F1.4, 40
IRE units, 14.5db (max)
S/N ratio: 46db (luminance)
Lens: 4mm–64mm (16x) zoom with 2X digital
Auto/manual iris
Auto/manual focus
Wiring: One shielded twisted-pair RS-485 cable (24-14
AWG) for control data (home-run wired or daisy-
chain wired – maximum distance = 4000 feet
total). Daisy-chain wiring max. scans = 32.
Two 14-22 AWG wires for 12V dc.
RG-59/U Coaxial Video Cable with BNC
connector (maximum 1500 feet).
1
A minimum of 12Vdc is required at each dome for proper operation of the scan.