STRATOS™ Inspire should always be used with the array in
‘landscape’ format. It can be mounted at any angle from flat
(horizontal) to upright (vertical), depending on the intended
interaction zone and surrounding equipment.
Should security be a concern, a security bolting position is
incorporated at the rear of the STRATOS™ Inspire. A security M4
bolt can be used to fit an appropriate security leash or tether
(not supplied with the product) to this point.
Always connect the power and USB cables to the STRATOS™
Inspire once installation is completed, and before turning on the
power supply.
While every installation is likely to utilise different equipment
(screens, plinths, etc.), the flexibility offered by the size of
the STRATOS™ Inspire interaction zone enables convenient
installation with haptics focused at the operators’ hand.
STRATOS™ Inspire can be used to create haptics on a user’s hand in a 3-dimensional zone.
Viewed from the side of the unit:
Viewed from the top of the unit:
Seen from the front of the array, the haptic interaction zone measures approximately:
We do not recommend attempting to create haptics outside this zone as they may be inconsistent or feel
weak to the user.
Depth
Width
Best haptic quality
Green
50 to 475 mm (2” to 19”)
0 to 400 mm (0” to 16”)
Good haptics
Yellow
475 to 630 mm (19” to 25”)
400 to 480 mm 16” to 19”
Acceptable haptics
Orange
630 to 700 mm (25” to 28”)
480 to 560 mm (19 to 22”)
When designing a mid-air haptic experience, it is important to ensure that a user’s hands will intersect with
the haptic interaction zone in a way that naturally complements other elements, such as visual effects,
audio effects or holograms.
