Ultraflex ND1-MM, Руководство по установке

Страница: 15 / 40

ZTF SYSTEM
-
page 15
of 39
Installation manual
ULTRAFLEX
CAUTION
Apply grease to the screw shafts before tightening the nuts.
CAUTION
The bracket must be oriented as shown in the picture.
3.4 Installation with 90-115-130 HP Yamaha engines from 2015 to date
The ZTF installation with 90-115-130 HP engines from 2015
requires the use of KIT ND1-Y (see also par. 2.2).
1 Fasten bracket (1) on device (2) using screws (3) and nuts (4) after having properly placed washers (5).
Lock using 2 18mm wrenches with a tightening torque of 80
Nm (59 lb.-ft.).
NECESSARY TOOLS
2 Screw and lock the studs (7) to the engine arm (6) follow-
ing the tightening torque and the instructions included in the
manual of engine manufacturer's
tiller handle
.
(2 x) Open end
wrench
18mm
Torque
wrench
MOLYKOTE
®
1000
KIT ND1-Y
Open end wrench
9/16"
Open end wrench
14mm
1
4
5
3
9
10
11
7
4
2
5
1
3
6
7
BOW
STERN