F. For Jumper 305, count -> 16 holes from Point ZERO on the top bars and the corresponding eyeletsto move on to Point16.
For Jumper 366, please count 18 holes from Point B and for Jumper 430 -> 22 holes. Attach a spring to this point, as shown
in FIGURE 6. By this time you should have attached four springs to the points ZERO, A, B and C. This even distribution of the
tension is important for the correct and easy assembly of the trampoline mat, as shown in FIGURE 6.
G For Jumper 305, every eightholes attach a spring to the correspondingeyelets; for Jumper 366, every nine holes attach a
spring; for Jumper 430, every 11 holes attach a spring. For even distribution of the tension and an easier assembly, each of
the springs should be attached to the opposite sides of the mat of the frame, i.e. first A1 and then C1, B1 then D1, etc. In ad
-
dition to the previously attached springs, you should have springs at ZERO, A1, A, B1, B, C1, C and D1, as shown in FIGURE 7.
UltraFit
ZERO
ZERO
C
48 (305)
54 (366)
66 (430)
A
16 (305)
18 (366)
22 (430)
A
1
D
1
B
1
C
1
A
C
B
B
32 (305)
36 (366)
44 (430)
FIGURE 6
FIGURE 7
