manualshive.com logo in svg

Ultradent Products GEMINIEVO 810 DIODE LASE, Руководство пользователя

Поделиться
Скачать
Ultradent Products GEMINIEVO 810 DIODE LASE Скачать руководство пользователя страница 48

48

Turn aluminum handpiece  

shell counter-clockwise

to be removed.

Remove aluminum handpiece  

shell for cleaning and sterilization.

7mm PBM Tip turn counter clockwise to remove it.

3mm PBM Tip turn counter clockwise to remove it.

Use extreme care not to accidentally 

damage LED lens.

CLEANING AND STERILIZATION PROCEDURES

NOTE:

 The exterior of the laser unit is not routinely contaminated by procedures. The Guided Touch Interfce and 

Electroluminescent display should be covered with a protective clear adhesive barrier film, replaceable after each patient.  

If the exterior of the laser unit should become contaminated, it should be wiped down with CaviWipes, or equivalent product, 

then re-covered with a new protective plastic cover. We recommend wringing out any cleaning wipes before use to avoid 

dripping liquid on the laser unit.

To reassemble, slide the handpiece shell onto the handpiece body and turn clockwise to tighten. 

Remove / reassemble the handpiece shell or 3mm/7mm PBM adapter following the instructions below.

DO NOT 

SPRAY ANY DISINFECTANT DIRECTLY ON THE LASER UNIT, BECAUSE IT WILL DAMAGE  

THE TRANSPARENT ELECTROLUMINESCENT DISPLAY.

DO NOT

 USE ABRASIVE MATERIALS TO CLEAN THE LASER OR THE DISPLAY. 

Содержание GEMINIEVO 810 DIODE LASE









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды