Ultradent Products GEMINIEVO 810 DIODE LASE, Руководство пользователя

Страница: 18 / 72

18
PRESET MENU
WI-FI
ACTIVE
STBY
HOME
8 1 0 9 8 0
D U A L
ACTIVE
STBY
ACTIVE
STBY
“810 ACTIVE”
“980 ACTIVE”
“ DUAL
WAVELENGTH
ACTIVE”
“810 STBY”
“980 STBY”
“DUAL
WAVELENGTH
STBY”
CONTROLS, OPERATION & USE
05 - LASER STBY AND ACTIVE MODES
The Active/STBY Guided Touch Interface selection serves a dual purpose . It activates (ACTIVE) and deactivates
the laser (STBY). By default, the system powers up in STBY mode. The laser cannot be activated prior to selecting
a wavelength. Each time the ACTIVE/STBY selection is touched, the system toggles between Active and STBY modes.
There is an audio confirmation (unless voice confirmation is muted), and an icon for either “ACTIVE” or “STANDBY”
near each wavelength indicator. The red aiming beam and tip illumination are visible only when the laser is in
Active mode.
When the system is in Active mode, touching any selection other than LEFT and RIGHT will return the system to
the STBY mode. When the Activation Pedal is depressed in the Active mode, the outer indicator lines around each
wavelength icon on the display flashes to provide a visual indication that the laser is firing. There is also an audio beep
when laser is being fired. For safety purposes, a laser firing delay of 0.25 seconds was implemented in order
to prevent accidental activation.