manualshive.com logo in svg

Ultradent Products GEMINIEVO 810 DIODE LASE, Руководство пользователя

Поделиться
Скачать
Ultradent Products GEMINIEVO 810 DIODE LASE Скачать руководство пользователя страница 22

22

08 -  HAPTIC SENSE “HS” - ACTIVATION PEDAL  

& PBM ADJUSTEMENTS

The Gemini EVO 810+980 soft tissue laser is equipped with Haptic Sense “HS” in order to add an additional dimension 

of feedback while depressing the activation pedal or during PBM procedures. This feature will provide the user 

a buzzing sensation to the foot or hand while the activation pedal is depressed. To toggle the Haptic Sense “HS” 

between activation pedal and handpiece (PBM procedures only), press the haptic icon. Blue icon indicates Haptic 

Sense is available for activation pedal and Amber icon for handpiece (PBM procedures only). To adjust intensities 

between LOW, MEDIUM, HIGH, and OFF, touch the arrows UP / DOWN to change the intensities.

HAPTIC

HAPTIC

Blue= Activation Pedal

Amber = Handpiece  

and Activation Pedal  

for PBM procedures

CONTROLS, OPERATION & USE

07 - TIP ILLUMINATION

The Gemini EVO 810+980 soft tissue laser handpiece is equipped with a tip illumination light to provide better visibility 

of the surgical site during treatment. To toggle the light intensities between LOW, MEDIUM, HIGH, and OFF, touch 

the MENU icon and select TIP LIGHT on the Guided Touch Interface. Then use the arrows UP / DOWN to change LED 

intensities. LED will only stay on for 3 seconds as a preview when not in active mode. Tip Illumination icon shows 

Green color when this feature is enabled and Red when it is OFF. 
Please note arrows UP / DOWN will appear and disappear according to the selected settings. As an example, if you 

select HIGH, the UP arrow will disappear indicating this is the highest setting available. The same behavior happens 

when you select OFF, in which the DOWN arrow will disappear.

Содержание GEMINIEVO 810 DIODE LASE









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды