background image

ULTRA STEEL

1 8

VOLT

Cordless Power Tool Combo Kit

INSTRUCTION MANUAL

PIECE

CAUTION: Before using this product, read this manual and follow all Safety Rules

                       and Operational Instructions.

Go to www.ultrasteeltools.com to register your product.

Please read before returning this product to store for any reason.

If you have questions or experience a problem with your Ultra Steel purchase,

go to http://www.ultrasteeltools.com for instant answers 24 hours a day.

If you can’t find the answer or don’t have internet access, call 1-800-840-

7856 from 8 a.m. to 5 p.m. Eastern time Monday through Friday.

AP00973S

15

The RBRCTM Seal (Rechargeable Battery Recycling Corporation) on the 

nickle-cadmium battery (or battery pack) indicates that the cost of 

recycling the battery or battery pack have already been paid by Ultra 

Steel. In some areas, it is illegal to place spent nickle-cadmium batteries in 

the trash or municipal solid waste stream and the RBRC program provides an environ-

mentally conscious alternative.RBRC in cooperation with Ultra Steel and other battery 

users, has established programs in the United States and Canada to facilitate the 

collection of spent nickle-cadmium batteries. Help protect our environment and 

conserve natural resources by contacting your local recycling center for information on 

where to drop off the spent battery, or call 1-877-2-RECYCLE.

THE RBRC 

TM

 SEAL

FULL ONE YEAR HOME USE WARRANTY

Ultra Steel warrants this product for one year against any defects in material or 

workmanship. The defective product will be replaced or repaired at no charge in 

either of two ways:
1) Return the product to the store in which it was purchased - this will result in an 

      exchange only.
Returns should be made within the time frame of the retailer’s policy for exchanges 

(usually 30 to 90 days after the sale). Proof of purchase is required. Please check with 

the store from which your purchase was made to determine policy regarding returns 

2) Send the product to Ultra Steel for repair or replacement (whichever Ultra Steel 

      determines is the best option) and include your proof of purchase.

       legal rights and you may have other legal rights which vary from state to state 

       or province to province. For questions, call Ultra Steel at 1-800-840-7856. 
This product is not intended for commercial use.
SERVICE INFORMATION:
For technical advice, repair, or genuine replacement parts, 

call 1-800-840-7856 or visit www.UltraSteeltools.com
FREE WARNING LABEL REPLACEMENT:
If your warning labels become illegible or are missing, call 1-800-840-7856 for free 

replacement.
Ultra Steel is a registered trademark of and distributed by Test Rite Products

Corporation, 1900 S. Burgundy Place, Ontario, CA. 91761, U.S.A.,

Made in China

Содержание AP00962G


















Отзывы: