OWNER’S MANUAL
REMOTE VEHICLE STARTER
PAGE 18
Shock Sensor
Shock Sensor Programming/Adjustment
METHOD 1:
Step1 -
Press and hold the and
buttons for 3 seconds. The siren will chirp
and the park lights will flash 3 times and then the park lights will stay ON.
Step 2 -
While the park lights are on strike the vehicle with the amount of force
wanted to trigger the alarm*. Strike the vehicle the same amount of
force 3 times. The siren will chirp each time the system detects impact.
Step 3 -
Press and release and
buttons to exit.
* Strike the vehicle with the palm of the hand, be careful not to impact
the vehicle in an area that may cause damage. The most common
location for testing and setting the shock sensor is the A-pillar. The
A-pillar is the metal support that runs from the roof of the vehicle to
the hood area. Avoid hitting the windshield when programming.
Temporary Shock Sensor Bypass
1. Press and release the
button (to arm system).
2. Press and release
button (within 3 seconds).
The system will chirp once to arm and once again to confirm
Temporary Shock Sensor Bypass.
