REMOTE VEHICLE STARTER
OWNER’S MANUAL
PAGE 19
If the remote starter does not activate when the
button is pressed the park
lights will flash a diagnostic code to indicate what shutdown input has been
triggered.
PARK LIGHTS STATUS LED DIAGNOSTIC CODE
3 Slow Flashes LED’s On Solid System Is In Service Mode
4 Slow Flashes Series of 4 Flashes Not in Reservation Mode (M units)
5 Slow Flashes Series of 5 Flashes Ignition On During Start Attempt
5 Flashes Series of 5 Flashes Hood Pin Opened
6 Flashes Series of 6 Flashes Brake Pedal Shutdown
7 Flashes Series of 7 Flashes Tach Lock-Out(see dealer)
Diagnostics
Battery Replacement
The transmitter battery should be changed at least once every year to maintain
proper operating range. Replace with a quality 1.5V battery (2 way remote).
Replace with two quality 3V CR2025 lithium batteries (1 way remote).
1
1 2
2 3
3
4
4
y
B
a
tt
e
r
Slide
a
te
r
y
B
t
Lift
Slide
e
r
y
B
a
tt
Positive
Negative
IMPORTANT SECURITY NOTES!
If the system has been triggered (shock sensor, door input..), the siren
will sound for approximately 60 seconds. Press and release the or
the
button to silence the siren (the system will remain armed).
Press and release
button to disarm the system. The siren and park
lights will flash three times to indicate the system had been triggered.
