Ultra Start 35 SERIES Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 24

Ultra Start 35 SERIES Скачать руководство пользователя страница 3

Feature List

- Control module - 4 button 2-way remote transmitter
- Antenna with built in - 3 button remote transmitter
Program Button and LEDs - 6 pin Main harness
- 14 pin auxiliary harness - 2 pin auxiliary harness
- 4 pin keyless entry harness - 2 pin LT or Instant Start harness
- Install & Owner guides - Hood pin switch

- Auto Tach (Tachless, TL series only) learning with Quick Learn
- Run Time: 4/15/45 minutes
- Door locks: .125s/.75s/3s/double unlock/ignition lock/unlock
- Horn output 5ms/10ms/50ms
- Timer or Cold Start (LT series) with 3 different start intervals
- Programmable Wait to Start or (+/-) diesel Glow plug input
- Ground While Running/Anti-grind protection/Starter kill
- System Override Protection/Service Mode (Valet)
- Park light/LED diagnostics
- up to 4 different transmitter codes
- Panic mode - Engine Idle mode
- Car Finder mode - Turbo Timer mode

Please read manual thoroughly.

If the vehicle is a MANUAL TRANSMISSION, a “M” series
remote starter must be installed. Any model number followed
by the letter “M” is specially designed for MANUAL
TRANSMISSION vehicles. The “M” series remote starter will
not work in an AUTOMATIC TRANSMISSION vehicle.

Components

REMOTE VEHICLE STARTER

INSTALL MANUAL

PAGE 3

«
1
2
3
4
5
...
»

Содержание 35 SERIES

























Отзывы:

Нет отзывов