INSTALL GUIDE
PAGE 8
Wiring Descriptions
MAIN CONNECTOR (6pin)
Pin Function
Description
1-YELLOW
Starter Output
-
This wire will test 0V in OFF, ACCESSORY
and in the ON key positions. 12v during
START ONLY.
2-GREEN
Heater/Acc Output
-
This wire will test 0V in the OFF and
START key positions. 12-14V in the
ACCESSORY key position.
3-RED
12volt Input(30amp)
-
Supplies 12votls for the IGNITION,
PARK LIGHT and SELECTABLE outputs.
4-RED
12volt Input(30amp)
-
Supplies 12 volts for ACC and
STARTER outputs
.
5-BLUE
Ignition Output
-
This wire will test 0V in the OFF and
ACCESSORY key positions.12V in the
IGNITION and START.
6-WHITE
Selectable Output
- O
utput for 2nd IGNITION, 2nd
ACCESSORY or 2nd STARTER
.
OFF
ACCESSORY/ HEATER
RUN/ IGNITION 1
START
1.
2.
3.
TYPICAL IGNITION SWITCH