PAGE 15
INSTALL GUIDE
1)
With the ignition in the OFF position, turn the ignition key from “Off” to “On”
3 times, ON-OFF-ON-OFF-ON within three seconds.
NOTE:
Leave the key in the ON position
2)
Press and release the Program Button. The park lights will flash and the horn
(optional) or siren will chirp to confirm entering program mode.
3)
Select desired Program Menu (See below). The park lights will flash and the
horn (optional) or siren will chirp to confirm the selected menu.
4)
Select Programmable Setting:
a)
Press and release
the Program Button the correct number of times to
select the desired Program Setting. The park lights and LEDs will flash
and the horn (optional) or siren will chirp to indicate the Program Setting
that has been selected.
For example
: 1 flash/chirp= Program Setting 1;
2 flashes/chirps= Program Setting 2; etc…
b)
Press and Hold
the Program Button until the park lights flash and the horn
(optional) or siren chirps to confirm the desired setting.
For example
:
1 flash/chirp= Setting 1; 2 flashes/chirps= Setting 2; etc...
c)
Turning the ignition key to the “Off” position or 30 seconds of no activity
will exit Program Mode. This will be confirmed with a light flash and a
long siren chirp or honk (optional). The Program Menu may be changed
at any time by pressing the transmitter button (below), this will allow the
installer to jump from one menu, then quickly jump to another menu and
change another setting without re-entering Program Mode.
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program Button
For Menu 3,
press the
button
For Menu 1,
press the
button
For Menu 4,
press the
button
For Menu 2,
press the
button
Entering Program Mode
Program Menus
Menu 1: User Settings ( Button) Pages 17-18
This program menu is for the adjustments for the user and door lock options.
Menu 2: Additional Settings ( Button) Page 19
This program menu is for additional settings.
Menu 3: Starter Settings ( Button) Pages 20-21
This program menu is for various remote car starter applications.
Menu 4: Tach Settings ( Button) Page 22
This program menu is for tach signal adjustments.
