background image

SYSTEM PROGRAMMING - 

Menu 1

SETS OPTION 1 - SHORT PULSES- 

The output for lock and unlock is .25sec. 

Helps 

prevent windows from rolling up/down on some vehicles.

SETS OPTION 2 – LONG PULSES- 

The output for lock and unlock is 3 seconds. 

Used to activate vacuum door lock systems.

SETS OPTION 3 – NORMAL PULSES- 

The output for lock and unlock is .75sec. 

Used for most vehicles. (DEFAULT)

CON'T FROM PREVIOUS PAGE

SYSTEM PROGRAMMING - 

Menu 1

SYSTEM PROGRAMMING - 

Menu 1

SYSTEM PROGRAMMING - 

Menu 1

PAGE 17

80 SERIES

INSTALL MANUAL

  PROGRAM MODE

SETS OPTION 1 – AUTO-LOCK & UNLOCK ENABLED- 

The doors will lock when 

the key is turned on and unlock the when the key is turned off. 

SETS OPTION 2 – AUTO LOCK ONLY ENABLED- 

The doors will lock when the key 

is turned on but will not unlock when te key is turned off.

SETS OPTION 3 – AUTO LOCK DISABLED- The doors will not lock or unlock 
when the key is turned on or off. (DEFAULT)

SETS OPTION 1 – HORN/ SIREN DISABLED- 

The

 

HORN and SIREN and will 

activate with Panic and Car Finder Mode only.

1 CHIRP

1 CHIRP

2 CHIRP

3 CHIRP

SYSTEM PROGRAMMING - 

Menu 1

PAGE 16

80 SERIES

INSTALL  MANUAL

  PROGRAM MODE

CHANGE SETTING 1 - 
GOTO SETTING 2 - 

PRESS & RELEASE THE VALET SWITCH

PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)

SETTING 1- IGNITION AUTO-LOCKS

THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED

1 CHIRP

PRESS 

1 TIME

2 CHIRP

SETS OPTION 2 – HORN/ SIREN OUTPUT- The HORN and the SIREN* (alarm 
models) output will activate for all functions. (DEFAULT)

SETS OPTION 1 – DOUBLE UNLOCK & SINGLE LOCK PULSE- 

The system will 

provide 2 unlock pulses w/unlock and 1 lock pulse w/lock.

1 CHIRP

SETS OPTION 2 - DOUBLE LOCK & SINGLE UNLOCK PULSE- 

The system will 

provide 2 lock pulses  and 2 unlock pulses. 

1X

CHANGE SETTING 2 - 
GOTO SETTING 3 - 

PRESS & RELEASE THE VALET SWITCH

PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)

SETTING 2-HORN/ SIREN OUTPUT

THE SIREN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED

2 CHIRP

PRESS 

1 TIME

2X

SETTING 3-DOOR LOCK PULSES

THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED

3 CHIRP

PRESS 

1 TIME

3X

CHANGE SETTING 3 - 
GOTO SETTING 4 - 

PRESS & RELEASE THE VALET SWITCH

PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)

2 CHIRP

SETS OPTION 3 – NORMAL OPERATION- The system will pulse once for lock 
and once for unlock. (DEFAULT)

3 CHIRP

CON'T ON NEXT PAGE

CHANGE SETTING 4 - 
GOTO SETTING 5 - 

PRESS & RELEASE THE VALET SWITCH

PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)

SETTING 4- DOOR LOCK TIMING

THE SIREN WILL CHIRP 4 TIMES WHEN SETTING 4 IS SELECTED

4 CHIRP

PRESS 

1 TIME

4X

1 CHIRP

2 CHIRP

3 CHIRP

CHANGE SETTING 5 - 
GOTO SETTING 6 - 

PRESS & RELEASE THE VALET SWITCH

PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)

SETTING 5- AUXILIARY CHANNEL 1

THE SIREN WILL CHIRP 5 TIMES WHEN SETTING 5 IS SELECTED

5 CHIRP

PRESS 

1 TIME

5X

1 CHIRP

2 CHIRP

3 CHIRP

CHANGE SETTING 6 - 
GOTO SETTING 7 - 

PRESS & RELEASE THE VALET SWITCH

PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)

SETTING 6- AUXILIARY CHANNEL 2

THE SIREN WILL CHIRP 6 TIMES WHEN SETTING 6 IS SELECTED

6 CHIRP

PRESS 

1 TIME

6X

1 CHIRP

2 CHIRP

3 CHIRP

SETS OPTION 1 – NEGATIVE IGNITION OUTPUT- 

Output acts as a negative ignition 

output. # Activates Car Finder Mode.* 

SETS OPTION 2 – DOME LIGHT SUPERVISION- 

The output will activate for 

30seconds when unlock is pressed. # Activates Car Finder Mode.*

SETS OPTION 3 – AUXILIARY OUTPUT- Press and hold the # button to activate 
auxiliary with unlock and disarm pulse. (DEFAULT)

SETS OPTION 1 – AUXILIARY OUTPUT- 

The Auxiliary output will activate by 

pressing and holding the unlock and start buttons together.

SETS OPTION 2 – 2nd UNLOCK- 

The output will activate when the unlock button is 

pressed twice within 3 seconds.

SETS OPTION 3 – SECOND ACCESSORY OUTPUT- output acts as a negative 
second accessory output. (DEFAULT)

CON'T ON NEXT PAGE

ENTERING PROGRAM MODE 1

ON/OFF -  ON/OFF  - ON

(Leaving the key ON)

IGNITION KEY

Press and release 1 time 

PROGRAM SWITCH

1 CHIRP

Confirming

Program Mode

SIREN CHIRP

Press LOCK 

Button to 

Select Menu 1

REMOTE BUTTON

*Car Finder Mode is not available on 2way models

.

Содержание 1280 series

































Отзывы: