PAGE 21
INSTALL GUIDE
Setting 5 Maximum Crank Time
1) 10 Seconds 1 Flash/Chirp 10 sec max time that the starter will stay engaged.
2) 3 Seconds 2 Flashes/Chirps 3 sec max time that the starter will stay engaged.
*3) 5 Seconds 3 Flashes/Chirps 5 sec max time that the starter will stay engaged.
Press & Release the Program Button
5 Times (Setting 5) Confirmed with 5 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 6 Anti-Grind/Starter Kill
(14 pin auxiliary connector, pin 4)
1) Active 1 Flash/Chirp (-)When locked and during remote start (Anti-Grind).
2) Passive 2 Flashes/Chirps (-)When locked/30 seconds after ignition is OFF or
#2
pressed
*3) GWR 3 Flashes/Chirps (-) Output during remote start only. (Anti-grind/ Bypass)
Press & Release the Program Button
6 Times (Setting 6) Confirmed with 6 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 7 Safety Start
(Not available on 3270/3265/4270/4265 series)
1) 2 Press 1 Flash/Chirp Must Press the button twice within 3 seconds to start.
*
2) 1 Press 2 Flashes/Chirps Must Pres the button once to start.
Press & Release the Program Button 7
Times (Setting 7) Confirmed with 7 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
*(Default Settings)
Menu 3- Starter Settings
- continued
Содержание 1270 series
Страница 25: ...PAGE 25 INSTALL GUIDE Install Notes...
