PAGE 19
INSTALL GUIDE
Setting 1 Secure Valet Mode
(time required to set the system into Service Mode)
1) Secure Valet 1 Flash/Chirp Hold the Program Button for 15 seconds
*2) Normal Valet 2 Flashes/Chirps Hold the Program Button for 5 seconds
Press & Release the Program Button 1 Time
(Setting 1) confirmed 1 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 2 Parking Light/Trunk Output
(14 pin auxiliary connector, pins 2&8)
1) 30 sec. Output 1 Flash/Chirp On for 30 seconds when is pressed
2) Negative Park Lights 2 Flashes/Chirps Switches the Park Light/Trunk Outputs
*3) Park Lights 3 Flashes/Chirps 2 Flashes when is pressed
Press & Release the Program Button 2 Times
(Setting 2) confirmed 2 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 3 Siren Chirp Timing
(14 pin auxiliary connector, pin 5)
1) 5 ms Pulse Output 1 Flash/Chirp Short(Quiet) siren Output
2) 15 ms Pulse Output 2 Flashes/Chirps Long(Loud) siren Output
*3) 10 ms Pulse Output 3 Flashes/Chirps Normal(Medium) siren Output
Press & Release the Program Button 3 Times
(Setting 3) confirmed 3 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 4 - The Button Output
1) Trunk
2) N/A
*3) Car Finder
Press & Release the Program Button 4 Time
(Setting 4) confirmed 4 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 5 Siren or Horn Output
(2270/4270/4265 series ONLY)
1) Horn Output 1 Flash/Chirp Pulsed when alarm is triggered or panic.
2) Siren Output 2 Flashes/Chirps Constant output when alarm triggered.
Press & Release the Program Button 5 Time
(Setting 5) confirmed 5 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button
to proceed to the next step
*(Default Settings)
Press and
Release the
button for
Menu 2
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program
Button
Press and Hold
the Program Button
to Change Option
Menu 2- Additional Settings
Press and Release
the Program Button
Number of Times for
the Setting Chosen
Содержание 1270 series
Страница 25: ...PAGE 25 INSTALL GUIDE Install Notes...
