background image

WARRANTY EXCLUSIONS 

THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY.

Any product which has not been used, cleaned, maintained, 
or installed in accordance with the directions published in the 
appropriate installation sheet and/or owner's manual as well 
as national and local codes, including incorrect gas, electrical, 
or water connection. Star is not liable for any unit which has 
been mishandled, abused, misapplied, subjected to chlorides, harsh 
chemicals, or caustic cleaners, damaged from exposure 
to hard water, modified by unauthorized personnel, damaged 
by flood, fire, or other acts of nature [or God], or which have 
an altered or missing serial number.

•  Installation, labor, and job checkouts, calibration of heat controls, 

air and gas burner/bypass/pilot adjustments, gas or electrical 
system checks, voltage and phase conversions, cleaning
of equipment, or seasoning of griddle surface. 

•  Replacement of fuses or resetting of circuit breakers, safety 

controls, or reset buttons.

•  Replacement of broken or damaged glass components, quartz

heating elements, and light bulbs.

•  Labor charges for all removable parts in gas charbroilers and

hotplates, including but not limited to burners, grates, and 
radiants.

•  Any labor charges incurred by delays, waiting time, or operating 

restrictions that hinder a service technician’s ability to perform 
service.

Parts

 

that fail or are damaged due

 to normal wear

 or labor for 

replacement of Items that can easily be replaced during a daily 
cleaning routine.

 such as but not limited to 

silicone belts, PTFE 

non-stick sheets, 

knobs,

 control labels,

 bulbs, fuses, quartz heating 

elements, baskets, racks, and grease drawers.

Components that should be replaced when damaged or worn,
but have been field-repaired instead [eg. field-welded fry pots]

• Any loss of business or profits.

ADDITIONAL WARRANTIES

Specialty/chain specific versions may also have additional

and/or extended warranties.

LIMITED EQUIPMENT WARRANTY

Star Manufacturing [as well as its subsidiaries] warranties new products 
to be free from defects in material and/or workmanship for a period  
of one [1] year from the date of original installation, except as noted  
below. Defects that occur as a result of normal use, within the time  
period and limitations defined in this warranty, will at Star’s discretion  
have the parts replaced or repaired by Star or a Star-authorized service 
agency. 

THIS WARRANTY IS SUBJECT TO ALL LISTED CONDITIONS. 

Repairs performed under this warranty are to be performed by a Star- 
authorized service agency. Star will not be responsible for charges  
incurred or service performed by non-authorized repair agencies.  
In all cases, the nearest Star-authorized service agency must be used.  

Star will be responsible for normal labor charges incurred in the repair  
or replacement of a warrantied product within 50 miles (80.5 km) of  
an authorized service agency. Time and expense charges for anything  
beyond that distance will be the re

s

ponsibility of the owner. All labor  

will need to be performed during regular service hours. Any overtime  
premium will be charged to the owner. For all shipments outside the  
U.S.A. and Canada, please see the International Warranty for specific 
details.

It is the responsibility of the owner to inspect and report any shipping 
damage claims, hidden or otherwise, promptly following delivery.  

No mileage or travel charges will be honored on any equipment that is 
deemed portable. In general, equipment with a cord and plug weighing  
less than 50 lb. (22.7 kg) is considered portable and should be taken or  
shipped to the closest authorized service agency, transportation prepaid .        

PORTABLE EQUIPMENT EXAMPLES

• J4R popcorn machine
• 12NCPW and 15NCPW nacho

merchandisers

• nacho cheese warmers except 

11WLA-series models 

• specialty food warmers except

130R, 11RW, and 11WSA models

 

• all butter dispensers
• all nacho chip merchandisers

•  514LL fryer
•  15MC and 18MCP hot food 

merchandisers

•  QCS1, QCS2, and RCS2 toasters
•  16PD-A pretzel merchandisers
•  condiment dispensers except

HPD- and SPD-series models 

•  all pop-up toasters
•  all pastry display cabinets
•  all heat lamps    • all accessories

CONTACT

Should you require any assistance regarding the operation or
maintenance of any Star equipment; write, phone, fax or email
our service department. In all correspondence mention the
model number and the serial number of your unit, as well as 
the voltage or type of gas you are using.
Business hours are 8:00 a.m. to 4:30 p.m. Central Standard Time 
Telephone 

Star/Toasmaster

 314.678.6306

Fax 314.781.2714
Email [email protected]
www.star-mfg.com • www.toastmastercorp.com 

PRODUCTS

PARTS

LABOR

Star Ultra-Max®  griddles, 

charbroilers, and hotplates

 

2

 years

2

 years

Star-Max® fryers, griddles,  

charbroilers, and hotplates

2 years

2 years

Jetstar® popcorn poppers

2 years

2 years

Staltek™ roller grill coatings

5 years

chrome griddle surfaces [against 

peeling]

5 years

cast iron

 grates, burners, 

and burner shields

180 days

original Star

 

or Toastmaster parts 

sold to repair Star

 

or Toastmaster 

equipment

90 days

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.  

      

2M-Z21647 • Rev 

C

 • 0

2

.201

8

S

ervice First

1

 year

Содержание UM1854-NAT












































Отзывы: