ULTIMATE SPEED 346098 2004, Инструкция по эксплуатации

Страница: 39 / 54

ULGD 5.0 A1 ■ 36 │
GB
│
MT
Revitalising
If after about 90 sec . between 7 .5–10 .5 V are
detected, a 12 V battery is present .
Charging starts with a pulse charge for revitalising .
The voltage display flashes . Once 10 .5 V
are reached, the appliance switches to the other
charge steps .
Revitalising is the same for all the 12 V charge
programmes .
Program selection
NOTE
► If a battery is detected in the voltage range of
between 3 .7–7 .3 V, the programmes 2–3–4
can not be selected . The charging process takes
place automatically . Depending on the selected
program, the characteristic charge curve is
monitored for voltage, time and temperature .
Included are the diagnostics program, revital-
ising mode and retention charge .
(See principle representation program 3 Fig . C)
Program max. (V) max. (A)
1 6 V 7,3 V 0,8 A
2
*
14,4 V 0,8 A
3
*
14,4 V 5,0 A
4
*
14,7 V 5,0 A
Program 1 „6 V“ (7,3 V/0,8 A)
For charging 6 V batteries with a capacity of less
than 14 Ah .
♦ Press the program selection button , to select
program 1 . The symbol „6 V“ is displayed on
the LCD . During charging, the charge display
flashes and shows the progress of the charge
procedure (1–4 bars) . When the battery is fully
charged, the condition display shows 4 bars .
The flashing stops and the appliance automati-
cally switches to retention charge .
Program 2 „12 V“ (14,4 V/0,8 A)
For charging 12 V batteries with a capacity of less
than 14 Ah .
♦ Press the program selection button , to select
program 2 . The symbol
is displayed on the
LCD . During charging, the charge display
flashes and shows the progress of the charge
procedure (1–4 bars) . When the battery is fully
charged, the condition display shows 4 bars .
The flashing stops and the appliance automati-
cally switches to retention charge .
Program 3 „12 V“ (14,4 V/5,0 A)
For charging 12 V batteries with a capacity of
between 14 Ah–120 Ah .
♦ Press the program selection button , to select
program 3 . The symbol
is displayed on the
LCD . During charging, the charge display
flashes and shows the progress of the charge
procedure (1–4 bars) . When the battery is fully
charged, the condition display shows 4 bars .
The flashing stops and the appliance automati-
cally switches to retention charge .
Program 4 „12 V“ (14,7 V/5,0 A)
For charging 12 V batteries with a capacity of
between 14 Ah–120 Ah under cold conditions or
for charging AGM batteries .
♦ Press the program selection button , to select
program 4 .