Holder
adjustable
holding tabs
5a
5b
2. Setting the ball joint for the
desired tilt angle
n
Loosen the adjust-
ment wheel
5b
on
the ball joint
5a
behind the support
and set the desired
vertical or
horizontal position,
as well as the preferred tilt.
Then fasten again the adjustment
wheel
5b
.
3. Attaching a device to the holder
n
The lower holding tabs
˜
can be
adjusted to fit the size of the device.
The tabs
˜
can be pulled out and
pushed in by pressing the buttons on the
back of the holder
^
(marked “Press”).
Adjust both the holding tabs to fit the
size of your smartphone and make sure
that both the holding tabs are set the
same.
LB8_322267_1901_INT_Smartphonehalter_OSDE_OSNL_OSBE_OSCZ_OSGB_OSPL_OSSK_190607.indd 56
07.06.19 17:03