ULTIMATE SPEED 316940 1810, Руководство по эксплуатации

Страница: 6 / 34

ULGD 5.0 A1
GB
│
IE
│
NI
│
CY
│ 3 ■
■
This appliance may be used by chil-
dren aged 8 over and by persons
with reduced physical, sensory or
mental capabilities or lack of expe-
rience and knowledge, provided
that they are under supervision
or have been told how to use the
appliance safely and are aware of
the potential risks . Children must not
use the appliance as a plaything .
Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
■
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard .
Additional safety instructions
■
Do not use the charger for charging
non-rechargeable batteries .
■
Do not use the charger for charging
lithium-ion batteries .
■
Place the removed battery in a well-
ventilated location during charging .
■
The automatic mode of operation
and usage restrictions are explained
below in these operating instruc-
tions .
DANGER OF ELECTRIC SHOCK!
■
Do not operate the appliance with
a damaged cable, supply cord or
mains plug . A damaged power cord
causes danger to life by electric shock .
■
Before connecting to the power,
ensure that the power connection is
earthed, is 230 V ∼, 50 Hz, and is
16 A fused and equipped with an
RCCB switch (residual current circuit
breaker) in accordance with the cur-
rent regulations!
■
Disconnect the charger from the grid,
before you make or break connec-
tions to the battery .
■
Always connect the positive terminal
clamp (red) first .
■
The negative terminal clamp (black)
must be connected to the chassis at
least 10 cm away from the battery
and the fuel line .
■
Now connect the charger to the
power supply .
■
After charging, disconnect the
charger from the grid . Only after this
remove the clamp from the bodywork .
Following this, remove the clamp
from the battery .
DANGER OF EXPLOSION
AND FIRE HAZARD!
Protect yourself from a highly explo-
sive hydrogen-oxygen reaction!
■
Ensure that during charge and
charge retention procedures, there
are no naked lights (flames, cinders
or sparks)!
■
Ensure that the plus cable does not
come into contact with fuel lines
(e .g . petrol pipe)!