Ultimate Power UP12/2000SD-CG, Руководство пользователя

Страница: 21 / 24

Ultimate Power www.upinverters.com
- 19 -
1. DC polarity is reverse: the inverter is designed without DC polarity reverse protection. A polarity
reverse may severely damage the inverter
2. Wrong AC wiring
3. Operation in a condensing environment
4. Operating with an undersized generator or generator with unqualified wave form
5. Unauthorized entry attempts to repair or make adjustments to contents without consent
Appendix 1
SD Series Inverter&Charger
Electrical Specifications
Model UP12/2000SD-CG UP12/2500SD-CG UP12/3000SD-CG
Inverter
Output
Continuous Output Power 2000W 2500W 3000W
Continuous Output voltage 120 120 120
Surge Rating(20s) 6000W 7500W 9000W
Capable of Starting Electric Motor 2HP 3HP 3HP
Output Waveform Pure Sine wave/Same as input(Bypass mode)
Nominal Efficiency 85%(Peak) 83%(Peak) 83%(Peak)
Line Mode Efficiency >95%
Power Factor 0.9-1.0
Nominal Output Voltage rms 120VAC
Output Voltage Regulation ±10% rms
Output Frequency 60Hz ± 0.3Hz
Short Circuit Protection Yes, Current Limit Function (fault after 1s )
Max THD under full load 20% 20% 20%
Typical transfer Time 10ms(Max)
DC Input
Nominal Input Voltage 12V
Minimum Start Voltage 11.5/11.9V
Low Battery Alarm 12/12.4V
Low Battery Trip 11.5/11.9V
High Voltage Alarm & Fault 16V
High DC Input Recovery 15.5V
Low Battery voltage recover 12.5V
Minium load-Search Mode 25 W when Power Saver On
Charge
Input Voltage Range 100-135/90-135VAC
Input AC Current 20A 25A 30A
Output Voltage Depends on battery type
Charger Breaker Rating 20A 30A 30A
Max Charge Current (DC) 80Amp 100Amp 120Amp