Ultimate Power UP12/2000SD-CG, Руководство пользователя

Страница: 18 / 24

Ultimate Power www.upinverters.com
- 16 -
WARNING
The installer must use AC wires rated at least 75
℃
/167
℉
.
4.4 Grounding
Connect an AWG 8 gauge or greater copper wire between the grounding terminal on the inverter and
the earth grounding system or the vehicle chassis.
5 Troubleshooting Guide
Troubleshooting contains information about how to troubleshoot possible error conditions while
using the SD Inverter & Charger.
The following chart is designed to help you quickly pinpoint the most common inverter failures.
Indicator and Buzzer
Indicator on top cover LED on Remote Switch
Status Item
SHORE
POWER
ON
INVER-T
ER ON
FAST
CHG
FLOAT
CHG
OVER
TEMP
TRIP
OVER
LOAD
TRIP
POWER
SAVER
ON
BATT
CHG
INVERTER Alarm Buzzer
Line
Mode
CC √ × √ × × × × √ × × ×
CV √ ×
√,
blink
× × × × √ × × ×
Float √ × × √ × × × √ × × ×
Standby √ × × × × × × × × × ×
Inverter
Mode
Inverter On × √ × × × × × × √ × ×
Power Saver × × × × × × √ × × × ×
Inverter
Mode
Battery Low × √ × × × × × × √ √
Beep 0.5s
every 5s
Battery High × √ × × × × × × √ √
Beep 0.5s
every 1s
Overload On
Invert Mode
× √ × × × √ × × √ √
Refer to
“Audible
alarm”
Over-Temp
On Invert
Mode
× √ × × √ × × × √ √
Beep 0.5s
every 1s
Over-Temp
On Line Mode
√ × √ × √ × × √ × √
Beep 0.5s
every 1s