11
US
Step 1
Threaded
Connector
The safety pad must
be removed before
folding the trampoline.
Step 2
Bracket Guide
Step 3
Step 4
Step 5
FOLDING TRAMPOLINE
STORAGE INSTRUCTIONS
The ULTEGA FOLDING
TRAMPOLINE can be folded as illustrated for easy storage. Please follow the
following process:
WARNING:
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
ALWAYS USE TWO OR MORE STRONG PEOPLE
TO UNFOLD OR FOLD THE ULTEGA FOLDING
TRAMPOLINE. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THERAILS TO SPRING
BACK INTO THE FOLDED POSITION AND STRIKE SOMEONE WHICHCAN CAUSE SERIOUS BODILY INJURY
OR DEATH.
Remove the safety pad before folding the trampoline for storage. Failure to remove the pad will result in damage to
the pad.
: Unscrew the LEGS (7) from the trampoline. Refer to illustration Step
1.
: Remove the SAFETY PAD (6) from the frame. After the SAFETY
P
AD (6) is removed, place the trampoline on the floor with the
threaded connectors pointing up. Refer to illustration Step 2.
: To prevent the trampoline from snapping into the folded
position, push down the four RAILS (1, 2, 3, 4).
Then unhook
the Wire Ring from the SECURE PIN (10) and turn the pin
to a flat position to remove the pin.Firmly grasp both sides
of the trampoline and fold the trampoline upward,
the trampoline will fold upward at the BRACKET
GUIDES as shown in illustration Step 3.
: Refer to illustration Step 5. Set the position of the
SECURE PIN (10) as shown. Lift up the RAILS
(1, 2), insert the SECURE PIN (10) into the RAIL
(1),and hook the Wire Ring onto the pin from the
bottom of the RAIL (1).
: Fold the trampoline again as shown in
illustration Step 6.
•
•