12
2. Modify your computer's IP address, make your computer's IP and the
bridge's IP address be on the same network segment(LAN) so that you can
access them.
3. Change your computer's IP address to 192.168.255.xxx
(192.168.255.xxx cannot be the same as the IP of the CPE), then the entry IP
address is 192.168.255.xxx, the subnet mask is 255.255.255.0(Autofill), the
Default gateway is 192.168.255.xxx, Preferred DDS server 192.168.255.xxx.
You can use 192.168.255.105(xxx=2) in the reference picture to set.
Step 1:
Find and open "Open Network and Sharing Center" on your computer.
Tips
:
click the network icon in the lower right corner of the computer.
Step 2:
Find and open the "Change adapter settings", select "Local Area
Connection" to right-click to open the network properties. Refer to the picture
above to open.
Step 3:
Find and double-click open the "Internet Protocol Version 4(TCP/IPv4)",
choose the " Use the following IP address" and enter IP address, subnet mask,
Default gateway, Preferred DDS server.
